| HEAT PIPE SOLAR WATER HEATER |
|
Heat
Pipe Solar Collector
The heat pipe consists of the glass evacuated
tube and a copper heat pipe which is installed within the glass tube.
The copper heat pipe conducts heat from within
the evacuated tube to its tip(condenser) which is plugged into the header pipe
contained in the manifold. As water runs through the header pipe heat is
transferred from the heat pipe condenser to the water.
- Simple structure, the heat
pipe is formed just by aluminum swings, vacuum tube
and a single heat pipe.
- High
heat conducting efficiency, the diameter-altered condenser is able to increase
the heat conducting efficiency.
- high heat conduction
coefficient: 2000-5000 times of metal materials
- high quantity of heat
conduction: 1000 times of metal materials
- No loss of heat transferring media, long
service life, because no cracks occur.
- Suitable for areas with a rather low
temperature, for cracks could be avoided.
| Split SWH |
|
Split
Solar Water
HeaterSeparated Pressurized Closed Loop Solar Water Heating System
breaks
through the traditional structural design, that is collector and water tank are
separated, that is the tank can be put anywhere, so model is more convenient and
handsome.
These systems are
pretty much the only choice in very cold climates. When there is not enough
energy for sun, an electrical or gas back up element will be automatically
switched on by controller.
- .Simple Installation,
No Maintenance, Effective operation
- .Preferred option for extremely cold areas and questionable water
quality.
- The collector and the water tank are separated, so the water tank
can be installed anywhere.
- The controlling device is specialized, so the system runs automatically
- The water
tank applies the enamel internal bladder, run under
pressure.
- Provide the water at the same temperature, and protect the data
when power off, supply the hot water 24 hours a day.
| Compact Flat Plate SWH |
|
Compact Flat Plate Solar Water Heater
Flat-plate collectors
are the most common solar collectors for use in solar water-heating systems in
homes and in solar space heating. A flat-plate collector consists basically of
an insulated metal box with a glass and a dark-colored absorber plate.Solar
radiation is absorbed by the absorber plate and transferred to the flrid that
circulates through the collector in tubes.
- 1. Special Anodized aluminum alloy
frame to
ensure handsome appearance and can accept high pressure
without leakage.
- 2. 50mm fiberglass insulation and EPDM seal
strip to assure the solar collector can work under cold
temperature.
- 3. Patterned temper glass or low iron temper
glass (4mm thickness) is not easy broken with very high transmission
and low emission
- 4. Black chrome or Magnetic blue sputtering
coating has very higher absorption rate to ensure the high efficiency
|
 |
|
|
|
|
|
| All Glass Vaccum Solar Collector |
|
All
Glass Vacuum Tube
Solar Collector
Vacuum
tube consists of
two glass tubes made from extremely strong borosilicate glass. The outer tube
is transparent allowing light rays to pass through with minimal reflection. The
inner tube is coated with a special selective coating (Al-N/Al) which features
excellent solar radiation absorption and minimal reflection properties. The top
of the two tubes are fused together and the air contained in the space between
the two layers of glass is pumped out while exposing the tube to high
temperatures. This "evacuation" of the gasses forms a vacuum, which
is an important factor in the performance of the evacuated tubes
| House Hold SWH |
|
Household
Solar Water Heater Direct Thermosiphon
Solar Water Heater
Direct
Thermosiphon Solar Water Heater is one model best used for household heating.
- Inner
tank: Food Grade Stainless Steel by argon protect welding, supply water quality
and drinkable
- Outer
shell: Stainless steel
- Heat
insulation layer: 50-60mm import polyurethane integral foaming
- Frame:
Galvanized Steel coated uncorrsion layer, both install inclined and flat roof.
- High
Pressure Cold Water In: 6 bar cold water to tank from Feeder or Electric Auto
Valve.
- Automatic
Heating Element
| Flat Plate |
|
Split Flat Plate Solar Water Heater
Flat-plate collectors
are the most common solar collectors for use in solarwater-heating systems in
homes and in solar space heating. A flat-plate collector consists basically of
an insulated metal box with a glass and a dark-colored absorber plate. Solar
radiation is absorbed by the absorber plate and transferred to the fluid that
circulates through the collector in tubes.
- 1.Special Anodized aluminum alloy frame to
ensure handsome appearance and can accept high pressure without leakage.
- 2.50mm fiberglass insulation and EPDM seal
strip to assure the solar collector can work under cold temperature.
- 3.Patterned temper glass or low iron temper
glass (4mm thickness) is not easy broken with very high transmission and low
emission
- 4.Black chrome
or Magnetic blue sputtering
coating has very higher absorption rate to ensure the high efficiency
|
|
|
|
|
